Suzuki Jimny JB74 || FRONT GRILLE REPLACEMENT || How to Change Suzuki Jimny JB74 Front Grille

Suzuki Jimny JB74  || FRONT GRILLE REPLACEMENT || How to Change Suzuki Jimny JB74 Front Grille

How to Replace the Front Grille on a Suzuki Jimny JB74 | LowRangeNick DIY Guide

Are you looking to give your Suzuki Jimny JB74 a fresh, stylish look? Whether you’re upgrading the appearance, repairing damage, or simply enhancing your off-road beast, replacing the front grille is one of the most straightforward and effective modifications you can make.

1 – The Suzuki Jimny JB74 is renowned for its rugged capabilities, iconic design, and off-road prowess. It’s a favorite among off-road enthusiasts due to its compact size, reliability, and versatility in tough terrains.

2 – Tools and Materials Required –
Before you get started on this grille replacement, make sure you have the necessary tools and materials at hand. Here’s what you’ll need:

New Front Grille (compatible with Suzuki Jimny JB74)
Flathead Screwdriver (for prying off the clips)
Phillips Head Screwdriver
Trim Removal Tool (optional, but helpful)
Ratchet and Socket Set
Microfiber Cloth (for cleaning the area before installation)
Plastic Clips (if required for your grille)
Protective Gloves
Having the right tools on hand can save you a lot of time and hassle, so gather everything before starting the installation.

3. Safety Precautions
Safety is always key when working on your vehicle. Here are a few important tips to keep in mind during the grille replacement process:

Wear Protective Gear: Use gloves to protect your hands from sharp edges and ensure you’re wearing safety glasses to prevent any debris or dust from getting into your eyes.

Work in a Safe Environment: Ensure your car is parked on a flat surface and has enough room around it to comfortably move and work on the front end.

4. Step-by-Step Grille Removal
Loosening the Grille Fasteners
The first step in the removal process involves locating the fasteners that hold the stock grille in place. Depending on your specific model of Suzuki Jimny JB74, these may be screws, clips, or bolts. Here’s how to start:

Pop the Hood: Lift the hood of your Jimny to expose the top edge of the front grille.

Identify Fasteners: Look for the screws or plastic clips securing the grille. Typically, there are a few along the top and possibly more on the sides.

Loosen Screws or Clips: Use a Phillips head screwdriver to loosen the screws or a trim removal tool to pry off the clips without damaging them.

Detaching the Old Grille
Once the fasteners have been loosened, it’s time to remove the grille itself.

Gently Pull the Grille: Carefully pull the grille toward you, applying even pressure along the edges. If the grille doesn’t budge easily, check if any fasteners remain.

Handle with Care: Be cautious while pulling to avoid damaging the surrounding bodywork or headlights.

Set the Grille Aside: Once removed, set the old grille aside. If you plan to keep it as a backup, store it somewhere safe.

5. Preparing for the New Grille Installation
With the old grille removed, it’s important to prepare the mounting area for the new grille. Here’s how:

Cleaning the Mounting Area
Use a Microfiber Cloth: Wipe down the area where the new grille will sit. Dust, dirt, or debris could affect the fitment and secure attachment of the new grille.

Inspecting for Any Damage
Check Mounting Points: Inspect the grille’s mounting points to ensure they are in good condition and ready for the new installation.

Replace Damaged Clips or Fasteners: If any of the plastic clips or screws are damaged, replace them before proceeding.

6. Installing the New Front Grille
Aligning the Grille with Mounting Points
Now that the area is prepped, it’s time to install the new grille.

Align the Grille: Hold the new grille in place, ensuring it lines up with the mounting points on the vehicle.

Double Check Fitment: Make sure the grille fits snugly and doesn’t obstruct any other components, such as the headlights or bumper.

Securing the New Grille
Once aligned, you can secure the grille in place

Disclaimer:
Due to factors beyond the control of Lowrangenick, I cannot guarantee against improper use or unauthorized modifications of this information. Lowrangenick assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Lowrangenick recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Lowrangenick, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Lowrangenick.

Thanks a lot for watching guys! If you enjoyed this video and would like to see more videos like this. Please like and Subscribe to my channel : )

#suzukijimny #jb74 #jb64

574
Like
Save


Comments

@mattyoz0 says:

I'm glad you're back, mate.

@mrskinnyman675 says:

What happened to the no drill snorkel?

@CalebPlayz says:

What happened to the snorkel? No good?

@bluedunn374 says:

Gave up on the MUX?

@Sunny22445 says:

Looks are personal but that oem grill gave it a rugged look.

@baker_st_irregular5712 says:

Glad to see ya back mate, your vids on the mux have been a huge inspiration for working on my holden trailblazer

@AaronHarding-j8u says:

Hey Nick where did you source the grill from mate?

@wingzero743 says:

What happen to mux?

@Ren-qp5dt says:

Glad to see you do another video, hope everything has been ok, cheers from Wagga Wagga

Comments are disabled for this post.