How to Replace Front Wheel Bearing 2007-2009 Saturn Aura

How to Replace Front Wheel Bearing 2007-2009 Saturn Aura

Buy Now!
New Wheel Bearing & Hub Assembly from

This video shows you how to install a wheel hub and bearing on your 2007-2009 Saturn Aura. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This process should be similar on the following vehicles:
2007 Saturn Aura
2008 Saturn Aura
2009 Saturn Aura

Tools you will need:
• Pry Bar
• 10mm Socket
• 13mm Socket
• 15mm Socket
• 19mm Socket
• 36mm Socket
• 1/2 Inch Air Impact Gun
• 3/8 Inch Air Impact Gun
• Swivel
• Torque Wrench
• Anti-Seize Grease
• Brake Parts Cleaner
• sanding disc
• Center Punch
• Hammer


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

√ Watch the Video

√ Buy The Part at 1A Auto

√ Do it Yourself

√ Save Money

Ballinonabudget says:

Can the big hub bolt be removed without an impact gun, with a breaker bar or will it spin?


Thanks for the excellent video. Are there no brake backing plates on this model (XE?). I have them on my 08 XR.

Mariah Janae says:

thank you buddy

Comments are disabled for this post.