Classic 1971 Oldsmobile Project (18) – Fluid Won't Fix a FAILING Transmission

Classic 1971 Oldsmobile Project (18) – Fluid Won't Fix a FAILING Transmission

​ @ChaseClassicMotors Shorts – Season 1
#chaseclassicmotors #mechanic #oldsmobile #classiccars #vintagecars

Clip taken from S1Ep9 “No Cutlass for Olds Men”: In 1983, a Detroit teenager purchased his older brother’s swanky Oldsmobile convertible. Now 40 years later, Chase Classic Motors is on a mission to reunite the owner with his late brother’s automotive legacy… and there is lots of work to be done!

CHECK OUT OUR WEBSITE and FACEBOOK PAGE:
https://www.chaseclassicmotors.com/
https://www.facebook.com/share/19xDZaXWKL/

VISIT US NEXT TIME YOU’RE CRUISIN’ THRU DETROIT:
Chase Classic Motors, LLC
22699 Morelli Drive
Clinton Township, MI 48036

1,147
Like
Save


Comments

@jamespainter3184 says:

38 yr tech here we used to use a ballpene hammer and a smaller hammer to flatten the over torqued holes .. then we would purchase the load spreader bars for trans pans from summit or some place time that because it always seemed the metal was weak after resurfacing the bulging bolt holes. Good luck guys

Comments are disabled for this post.