Car Fix DIY Videos

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASFU00145

This video shows you how to install new upper control arms from TRQ on your 2005-2021 Nissan Frontier (4.0L V6). Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

Estimated installation time for a professional technician is approximately: 1 hour 18 minutes

This repair was done on a 2012 Nissan Frontier S 4.0L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2005 Nissan Frontier
2006 Nissan Frontier
2007 Nissan Frontier
2008 Nissan Frontier
2009 Nissan Frontier
2010 Nissan Frontier
2011 Nissan Frontier
2012 Nissan Frontier
2013 Nissan Frontier
2014 Nissan Frontier
2015 Nissan Frontier
2016 Nissan Frontier
2017 Nissan Frontier
2018 Nissan Frontier
2019 Nissan Frontier
2020 Nissan Frontier
2021 Nissan Frontier

Tools you will need:
• 19mm Wrench http://1aau.to/oap4/1AXAA00010
• 14mm Socket http://1aau.to/ocuY/1AXAA00015
• 19mm Socket
• 21mm Socket
• 22mm Socket http://1aau.to/ov3/1AXAA00266
• Socket Driver
• Socket Extensions http://1aau.to/ocuY/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/obwa/1AXAA00044
• Bungee Cord
• Gloves http://1aau.to/obGY/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oaPb/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oaAI/1AXAA00065
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.