How to Replace Steering Rack & Pinion Bellow 2004-2015 Nissan Titan

How to Replace Steering Rack & Pinion Bellow 2004-2015 Nissan Titan

Buy Now!
New Steering Rack & Pinion Bellow from

This video shows you how to install a new steering rack bellows boot on your 2004-2015 Nissan Titan. The steering rack bellow is a plastic or rubber cover used to protect the joint between the steering rack and the tie rods from dirt, debris, water, and other contaminants that could corrode or damage the tie rod joint.

This process should be similar on the following vehicles:
2004 Nissan Titan
2005 Nissan Titan
2006 Nissan Titan
2007 Nissan Titan
2008 Nissan Titan
2009 Nissan Titan
2010 Nissan Titan
2011 Nissan Titan
2012 Nissan Titan
2013 Nissan Titan
2014 Nissan Titan
2015 Nissan Titan

Tools you will need:
• 22mm Wrench
• 21mm Socket
• Locking Pliers
• Pliers
• Ratchet
• Torque Wrench
• Copper Anti-Seize
• Floor Jack
• Hammer
• Jack Stands


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto
√ Do it Yourself
√ Save Money

Comments are disabled for this post.