Mercury Outboard Ignition Switch Fixed

Mercury Outboard Ignition Switch Fixed

Sierra MP41070-2 3-Position Magneto – Off-Run-Start
Learn more:

Need to replace your ignition switch? I did with a 90HP Mercury outboard. Many of you may hear this engine referred to as the “Tower of Power”.

This was a simple 10 minute fix and I hope you have the same experience I did.

We create simple and basic, do it yourself (DIY) videos to help you with your small engine equipment.

Disclosure: This YouTube video is provided for informational purposes only. DIY Repair Guy is working in an open and fully ventilated area for the purpose of making this video. Small engines should be operated outside in fully ventilated areas only and it is important that you wear the appropriate safety gear. If you choose to try one of the suggestions made in this video, you do so at your own risk. Please ensure that you take all proper safety measures before attempting any project. Any damage to equipment caused as a result of following this video is not the responsibility or liability to DIY Repair Guy. Repairs are made at your own risk and if you are unsure about a repair or method described we recommend bringing the equipment to your local repair shop.We may receive commission for any purchases made through the Amazon link above.



Greg Maggert says:

Nice. Thanks

Scotty Bobbitt says:

What was the part # for the switch?

Comments are disabled for this post.