How to Replace the EGR Valve on a 2002-2009 Mercedes E320 W211

How to Replace the EGR Valve on a 2002-2009 Mercedes E320 W211

Brian Eslick from How to Automotive takes you step-by-step through the process of replacing the EGR valve on a 2002-2009 Mercedes E320 W211.

Link for How to Diagnose a EGR Valve

Affiliate link mentioned in the video Pierburg Exhaust Gas Recirculation Valve

Affiliate link mentioned in the video for Victor Reinz Exhaust Gas Recirculation Valve Gasket

Affiliate link mentioned in the video for CRC Carb and Choke Cleaner, 12 oz Aerosol Can, Clear

Affiliate link mentioned in the video for Milwaukee 2457-21 3/8-in Cordless M12 Lithium-Ion Ratchet Kit

Affiliate link mentioned in the video for Milwaukee 2754-22 M18 Fuel 3/8″ Impact Wr- Xc Kit

For more videos, tips, and to purchase recommended tools and products visit my website at:

Stay connected at:
Facebook: Automotive-432536836946801/?ref=settings
LinkedIn:… 819839118

Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #HowtoAutomotive #MilwaukeeTools #AutoRepair



Freddy Hakimi says:

Great video. very helpful. Thank you.

Jaime Cueva says:

Do you have a video on no reverse when transmission gets warm?

Khoolhwhip says:

So I switched mine out but I still get a code after. User Error?

Dino Dino says:

I'm happy to finally found right video about this problem,any other video from someone else is crap,not recorded good or talk too much and no show nothing.This is the best video ever.Thank you so much.

Louis Houston says:

You could not have made this any simpler…. I have a 2001 E320 w 192,000 miles. It’s a third car that I basically use to run errands with. Other than the cost of new tires, I really don’t want to sink additional money into it. Brought the car to my local autozone and had it diagnosed for free. Now, after viewing your video, I know where it is and how to replace it…..saving me the labor costs…. TY….

John Conner says:

Me: turns in man card

Michael Bisk says:

great video. thank you

Shaded Moon says:

Thank you, just what I was looking for. Clearly explained and filmed makes the job for us others so much easier.

Erin Ceccacci says:

Awesome video! What is the torque on the EGR valve bolts?

Ray Staples says:

Great video not a big job either my mechanic bet not charge me an arm and leg

Ernesto Robledo says:

Things that helped me were to add WD 40 to the top fitting and let it sit for 10 minutes before breaking it loose. Before removing the tube I hit it with a hammer lightly a couple times to break it loose.

frank finney says:

First class, straight to the point how to.

Bill Royal says:

Great video! It would help if you would update the video title to include the W210, since that's what you're working on in the video. Otherwise, great work – this was super helpful.

Искать Надо says:

Хуй поймешь но здорово

Hasssn Fouani says:

I have c240 model 2002 the car burn oil and smok suddenly ,i have only one. Fault p0400 exhaust gas recerculation. Plz help me.

Waana Sydney Lungu says:

Very helpful .Thanks

Jonathan Netherton says:

This is not only the greatest video on how to replace a W211 EGR valve, I personally think that this is one of the greatest how-to videos on Youtube. So many are twenty minutes of talking about the thing being replaced and spend maybe 30 seconds going through the actual procedure. This is simple, linear, deals with all common safety points, and leaves out no screw or gasket. This is a prime example of how how-to videos should be done. The only improvement I feel could be made is to finish the video sequence as you like it and add in your spoken instructions in postprocessing, as the changes in the pitch and tone of your voice are a bit jarring.

Rob's Wrenches says:

Great work Brian. You've demonstrated to my just why I need a set of wobble plus extensions as well.

Comments are disabled for this post.