Jaguar Fuses – Jaguar XJ6, XJ12 and XJS

Jaguar Fuses – Jaguar XJ6, XJ12 and XJS

Many of the electrical problems on Jaguars of the 70s and 80s can be traced to the fuse box. In this video I show some common problems with fuses, the fuse box and how to solve them on a Jaguar XJ6, XJ12 and XJS.

Jaguar XJ6 Playlist: https://www.youtube.com/playlist?list=PLOm9vGQzilhGq9WOw7l2rB92CJqXPrT6T

Support the channel: https://www.patreon.com/livingwithaclassic
Follow on Instagram: https://www.instagram.com/living_with_a_classic/
Business contact: livingwithaclassic@gmail.com

Other Video you may like:
Adjusting Valves: https://youtu.be/AMgIBVO6OgM
Inspect Cylinder Head: https://youtu.be/Zs4Tkeel00Y
Bad Head Gasket XJ6 : https://youtu.be/HxbutvsuaMM
Lapping Valves: https://youtu.be/nJFH-GeoJLg
Polishing SU Carburettors: https://youtu.be/vgij9HXSZpM
SU Carburettor explained: https://youtu.be/TRwOlskQL3s

Music used: Dancing Hearts – Anders Enger Jensen https://www.youtube.com/watch?v=usxFRruHgm8

#jaguar #fuses #fusebox

46,016
Like
Save


Comments

@fredpresler says:

I really appreciate these vids. Thank you.

@petem85793 says:

Another issue you didn't cover is that on the fuse box only one side of each contact pair is connected. I removed the fuse panel and soldered wire joining links so that when you put the fuse in, it is connected on both of the brass fingers that hold the fuse in place.

@BalancedLivingHub-q8x says:

Hi, Thanks for the video, do you know where the 1994 xjs fuse box are

@totlinototolonio2956 says:

Hi on my jaguar for 2 days ago dashboard is nothing working, oil,petrol tank ,tacho, battery all,fuses ok, do u have any ideas

@brionstarr7911 says:

My 87 XJS has a fuse box with blade fuses, would this mean that it was replaced ? Or did some models come with blade fuses ?

@aar0nV70 says:

This might be a silly question, but relating to the fuse conversion @10:10 do i still need to convert if I live in the UK now and I am looking at fuses or do we still do things the same way? or have we chnaged to how the rest of the world does it?

@rodrigotorres4982 says:

Cual es el fusible dela bonba de gasolina

@MICHAELSMITH-ot3tc says:

i this is 4 years old but what is the button on the fascia at the top right hand aspect of the fuse aperture Is it a thermal breaker thanks Mike How do I send a one off paymetn

@davidcarter3066 says:

1979 Jaguar XJ6 tail light & brake light does not work. What steps should I take?

I started off by replacing all of the fuses. Still no luck.

@SECRETGOVERMENT2012 says:

Need some help I have Hazzard lights but no hi beam no horn no turn signals and no lights on the dash it's a 83 s3 xj6 just stopped working is there a ground wire under the dash somewhere

@EmmanuelRigas-e5r says:

I HAVE A PROBLEM I NEED TO REPLACE RELAY # DAC 4862 IS FOR 1996 XJS
THE CENTRAL LOCKING RELAY FOR DOORS ECT., PLEASE TEXT ME ITS LOCATION IN THE CAR IF ITS OK A PHOTO WOULD BE APPRECIATED, THANK YOU.

@UnderGodBulldogs says:

Adam, where can i get a quality set of british rated fuses? Thanks

@wanderbread4217 says:

1996 Jaguar XJ XJS 2+2 Convertible 2D WHERE IS THE RELAY FOR THE DRIVER AND PASSENGER WINDOW?? I CANT FIND IT ANYWHERE>./ PLEASE HELP

@chuckwebster3076 says:

Good video. Your site has saved my bacon over and over. I blew a dash light fuse tonight; checked the fuse box and there it was; a blown fuse. I replaced it with one of my spares. Now I have to buy a replacement (for my replacement) and I'm on the road again.

@dougreed5888 says:

My 1989 XJS convertible had an engine temp gauge that did not work properly when I bought the car. As soon as I started it, the gauge would go to hot immed. Long story short, I found that the cluster had been removed and the flimsey tabs had been bent out of the way when they put the cluster back in. After jirry rigging the connection, and putting the cluster back in I have NO POWER to anything. No lights etc. and no ignition. Is there a Main switch/fuse/relay ?

@carelcallenbach6795 says:

Hi Adam,
Good video. I checked my fuses on my early series 2 xj12 just after your video was posted and noticed my fusebox had melted at the third fuse from the right. I want to replce the whole box with a modern more sturdy box and modern car fuses.
Is this do-able? On my old rover P6 v8 the electrics were so short fitted that it was nearly impossible. By the way the rover p6 has the same plastic melting problem as the jag. Rubbish quality.

@hanoiboy9839 says:

Excellent video. Thank you Adam !

@brandtmccorkle329 says:

Adam, Some of the better videos I've seen – great job. I've got an '89 XJ-S Convertible and just had to pull heater core for rebuild since I cannot find a new one. Do you have vids on this job? I waited far too long to tackle this -living with slight coolant smell for a while – and now have blower prob. I read on Jag Lovers that coolant leak can damage blower relays that are below? How about vid on getting the console out?

@alaindelmas7394 says:

Hello Adam, nice video indeed. I am the happy owner of a1996 XJS convertible and would like to access to the fuse box (passenger side for a LHD). I cannot manage… I do not want to damage something and I do not see any screw or clip, there is only the A/C sensor in the middle of the panel (a black plastic knob with holes). Any idea or clue about how I could access to the fuses box which is behind this panel ? Thank to every body for help…

@BridgettLVCowgirl says:

Does an American jaguar xj6 series 3 vanden plas have British or American fuse amps?

@JOLUAL1977 says:

Hello Adam, Home your doing great!!!
Can you help me? I was changing the warning lights to LED type bulb. I turned on the ignition to make sure they work but I accidentally touched the back part of the warning lights unit to ground and it sparked… From That point on, the hand break, battery warning lights don't turn on anymore …
Also, the alternator is not charging. Is there a fuse for the warning lights or for the alternator ??

please help me!!!!!

Comments are disabled for this post.