How to remove and install your 2014-2019 Infiniti Q50 Fender

How to remove and install your 2014-2019 Infiniti Q50 Fender

Replacing your 2014-2017 Infiniti has never been easier. We are as detailed as possible so you don’t miss anything. Get your car looking new with ReveMoto!

Purchase here:


0:00 Start
0:22 Intro
0:43 Headlight removal
2:09 Top fender cover removal
2:42 Taping our edges to prevent scratches/dents
3:18 Fender liner removal
5:06 Rocker panel molding removal
6:24 Fender door bolts
7:16 Lower fender bolts
7:53 Top fender bolts
8:42 Fender accessories replacement
11:59 Fender Install
13:23 Inner fender placement
14:48 Check the gap alignment
17:05 Outro

Tools Needed:
You will need a10mm open wrench and a socket wrench, flat-head screwdriver, and panel clip removers.

Replacing your 2014-2017 Q50 fender panel is not as complicated as it may seem. Removing the headlight is necessary to uncover or get access to other fender bolts. The rest of the fender is a combination of plastic push-pins and moe bolts. Our vehicle’s fender liner was petty much destroyed in the accident, so removing it was petty easy. Don’t forget to remove the bolts and clips along with the fender liner to the bottom of the bumper. This Q50 sport has rocker panels or side skirts that cover up the lower fender bolts. Carefully pop this molding off with your plastic panel clip remover. The last thing you want to do is scratch the paint on your vehicle. You do not have to remove the top inner fender bolt. You just have to loosen the bolts to remove the fork part of the fender. The rest of the bolts to remove are on the top under the hood.

When you mount the fender, be sure to put the fender behind the bracket on the door. Otherwise, you will not be able to insert the second inner-door bolt. The most important and sometimes unnoticed part of this the alignment of the hood and fender. Do not fully secure the fender until you drop the hood to make sure that the alignment or gap is adequate. Check the opposite side of the hood and door to make sure the spacing is accurate. Once you feel comfortable with the spacing, you can secure the bolts. If the spacing is off, you can adjust the fender by pulling it out and securing the screw.

Follow Us on:

#Infinitiq50 #Q50sport #fenderreplacement #paintedautoparts #revemoto

DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



ReveMoto - Pre-Painted Auto Body Parts says:

Thank you for watching our Q50 fender replacement video. Please let us know if there is something more you want to see for the Q50!
Purchase here:


severin pichon says:

I'm having trouble removing the driver side fender because the door is jammed .. How should I go about this ? …I intend to remove and replace the both doors and fender on the driver side

Comments are disabled for this post.