How to Replace Starter 2011-2016 Hyundai Elantra

How to Replace Starter 2011-2016 Hyundai Elantra

Shop for New Auto Parts at

This video shows you how to install a starter on your 2011-2016 Hyundai Elantra. The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.

This process should be similar on the following vehicles:
2011 Hyundai Elantra
2012 Hyundai Elantra
2013 Hyundai Elantra
2014 Hyundai Elantra
2015 Hyundai Elantra
2016 Hyundai Elantra

Tools you will need:
• Flat Blade Screwdriver
• Phillips Bit in a Ratchet
• 19mm Wrench
• 10mm Socket
• 12mm Socket
• 14mm Socket
• Trim Tool Set
• Locking Pliers
• Pliers
• Side Cutters
• Ratchet
• Socket Extensions
• Torque Wrench
• Drill
• Bungee Cord
• Gloves
• PAG Oil
• Safety Glasses
• Wire Ties
• Drain Pan
• Funnel
• Pick


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto
√ Do it Yourself
√ Save Money

Comments are disabled for this post.