How to Replace HVAC Blower Motor Assembly 2011-2016 Hyundai Elantra

How to Replace HVAC Blower Motor Assembly 2011-2016 Hyundai Elantra

Buy Now!
New HVAC Blower Motor Assembly from

This video shows you how to install an HVAC blower motor assembly on your 2011-2016 Hyundai Elantra. The blower motor, and typically integrated fan, is responsible for blowing the heated or cooled air from your heat or AC system into the cabin of your vehicle. A fan could become noisy if it is broken, or could stop spinning all together.

This process should be similar on the following vehicles:
2011 Hyundai Elantra
2012 Hyundai Elantra
2013 Hyundai Elantra
2014 Hyundai Elantra
2015 Hyundai Elantra
2016 Hyundai Elantra

Tools you will need:
• Phillips Bit in a Ratchet
• Phillips Head Screwdriver
• 10mm Socket
• Trim Tool Set
• Ratchet
• Socket Driver
• Gloves
• Safety Glasses


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto
√ Do it Yourself
√ Save Money

Comments are disabled for this post.