Buy Now!
New Strut & Spring Assembly from 1AAuto.com http://1aau.to/ib/1ASTS01707
This video shows you how to install new reliable front strut assemblies from TRQ on your 2011-2014 Hyundai Sonata. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.
This repair was done on a 2013 Hyundai Sonata GLS 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2011 Hyundai Sonata
2012 Hyundai Sonata
2013 Hyundai Sonata
2014 Hyundai Sonata
Tools you will need:
• 19mm Wrench http://1aau.to/o8H/1AXAA00010
• 12mm Socket http://1aau.to/obU7/1AXAA00015
• 14mm Socket http://1aau.to/obU7/1AXAA00015
• 17mm Socket http://1aau.to/obU7/1AXAA00015
• 21mm Socket http://1aau.to/oaxZ/1AXAA00043
• 24mm Socket
• 32mm Socket http://1aau.to/odG/1AAST00003
• Dead Blow Hammer
• Pliers
• 1/2 Inch Impact Gun http://1aau.to/oxk/1AXAA00252
• 3/8 Inch Impact Gun
• Ratchet http://1aau.to/obX9/1AXAA00016
• Torque Wrench http://1aau.to/oa2N/1AXAA00044
• Bungee Cord
• Cotter Pin
• Gloves http://1aau.to/oaL8/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oap2/1AXAA00068
• Jack Stands http://1aau.to/oach/1AXAA00065
• Wheel Chocks
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Great video! Thanks!
Best Video I have every watched! Just did my two front struts and sway bars on 2012 Sonata after watching this video twice and taking notes. Took me 2.5 hours not 10 minutes like you but still super happy as I expected this to be an all day event 🙂 This made it so much easier! I also installed TRQ struts so hoping they last a decent amount of time! I know I would have struggled with getting the strut away from the knuckle if I hadn't watched this and saw that all you have to do it remove the bearing nut and pull it forward! That was a game changer for me. Love that not only do you state just the facts but also the socket sizes and torques! No fluff and all business. Bravo and thanks again!
Is this also for a 2015? 11-15 are the same cars
Do you have to remove the axle nut? Other videos dont do that so im just wondering
You have the car all the way up so how else can we put the car up is jacks good
Thanks so much