How to Replace Exhaust Manifold Catalytic Converter Assembly 2011-2016 Hyundai Elantra

How to Replace Exhaust Manifold Catalytic Converter Assembly 2011-2016 Hyundai Elantra

Buy Now!
New Exhaust Manifold Catalytic Converter Assembly from

This video shows you how to install an exhaust manifold catalytic converter assembly on your 2011-2016 Hyundai Elantra. This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding.

This process should be similar on the following vehicles:
2011 Hyundai Elantra
2012 Hyundai Elantra
2013 Hyundai Elantra
2014 Hyundai Elantra
2015 Hyundai Elantra
2016 Hyundai Elantra

Tools you will need:
• Pry Bar
• 17mm Wrench
• 10mm Socket
• 12mm Socket
• 14mm Socket
• 17mm Socket
• O2 Sensor Socket
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Swivel
• Torque Wrench
• Drill
• Gloves
• Safety Glasses
• Hammer
• Pole Jack
• Ratchet Strap


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto
√ Do it Yourself
√ Save Money

Nestor Fabian Cordoba Victoria says:

Thanks for this video, you have a video same process for honda pilot 2009-2015? Thanks

Comments are disabled for this post.