Car Fix DIY Videos

Buy Now!
New Driveshaft from 1AAuto.com https://trq.video/ia-1ADSH00096

This video shows you how to install a new driveshaft on your 2006-2010 Hummer H3 3.7L L5. If your driveshaft has been vibrating or making noise from binding or a loose carrier bearing, or has broken completely, you can replace it yourself with this new made to fit TRQ driveshaft.

Estimated installation time for a professional technician is approximately: 1 hour 24 minutes

This repair was done on a 2007 Hummer H3 X 3.7L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2006 Hummer H3
2007 Hummer H3
2008 Hummer H3
2009 Hummer H3
2010 Hummer H3

Tools you will need:
• Pry Bar https://trq.video/oaAa-1AXAA00020
• 10mm Socket
• 11mm Socket
• 13mm Socket
• Socket Extensions
• Torque Wrench https://trq.video/ob8s-1AXAA00044
• Copper Anti-Seize
• Gloves https://trq.video/ocMp-1AXSS00048
• Marker / Writing Utensil
• Safety Glasses
• Rubber Mallet
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.