How to Replace Starter 2003-2007 Honda Accord 3.0L V6

How to Replace Starter 2003-2007 Honda Accord 3.0L V6

Buy Now!
New Starter from

This video shows you how to install a new starter from TRQ on your 2003-2007 Honda Accord (3.0L V6). The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.

Estimated installation time for a professional technician is approximately: 1 hour 6 minutes

This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord

Tools you will need:
• 12mm Socket
• 13mm Socket
• 17mm Socket
• 3/8 Inch Drive Ratchet
• Socket Extensions
• Swivel
• Torque Wrench
• Gloves
• Safety Glasses


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



@TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto
√ Do it Yourself
√ Save Money

Comments are disabled for this post.