How to Replace Front Lower Forward Control Arm Bushings 2003-2007 Honda Accord

How to Replace Front Lower Forward Control Arm Bushings 2003-2007 Honda Accord

Buy Now!
New Control Arm Bushing from

This video shows you how to install new front lower forward control arm bushings from TRQ on your 2003-2007 Honda Accord.

Estimated installation time for a professional technician is approximately: 2 hours 54 minutes

This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord

Tools you will need:
• Pry Bar
• 16mm Wrench
• 17mm Wrench
• 17mm Socket
• 19mm Socket
• 36mm Socket
• Bushing Removal Tool
• Press
• Locking Pliers
• Side Cutters
• Ratchet
• Socket Extensions
• Torque Wrench
• Gloves
• Marker / Writing Utensil
• Safety Glasses
• Floor Jack
• Hammer
• Jack Stands
• Rubber Mallet
• Wheel Chocks
• Wire Brush


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



@TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto
√ Do it Yourself
√ Save Money

@upper510 says:

@TRQ – How much should I expect to pay to replace a head gasket for a 2001 Honda Accord LX?

@addy2418 says:

Are those silver sockets impact grade? If so. Which brand sockets are those..?

Comments are disabled for this post.