How to Replace Front Lower Control Arm 11-13 Honda Odyssey

How to Replace Front Lower Control Arm 11-13 Honda Odyssey

Buy Now!
New Control Arm with Ball Joint from

1A Auto shows you how to repair, install, fix, change or replace failing, rusted, rotted, or damaged control arms with ball joint. This video is applicable to the 11, 12, 13 Honda Odyssey

🔧 List of tools used:
• 19mm Socket
• 21mm Socket
• Pickle Fork
• Needle nose pliers
• Needle nose pliers
• 1/2 Inch Breaker Bar
• Ratchet
• Torque Wrench
• Floor Jack
• Hammer
• Jack Stands

For More Info visit us at

While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



1A Auto: Repair Tips & Secrets Only Mechanics Know says:

Watch the Video
Buy The Part at 1A Auto
Do it Yourself
Save Money

Roman Rebisz says:

How to do a inner rod job outer

andy handyman says:

Why do you want save ball joint?

Jason Recor says:

Should you get an alignment after replacement?

Jim Nolan says:

Do you need to replace the control arms in pairs or can you do them one at a time?

Comments are disabled for this post.