2005-2010 Honda Odyssey Drive Belt Replacement DIY

2005-2010 Honda Odyssey Drive Belt Replacement DIY

Here’s how to replace the drive/serpentine belt on a 3rd generation odyssey.
Drive belt: https://amzn.to/2srOqWL
Drive belt tool: https://amzn.to/2taC0Cr



Stephen Cowell says:

The 19mm is the higher level (EX-L, Touring) version with the shock absorber tension… the lower trims use a 14mm integral to one of the idlers. Probably due to the bigger AC compressor for rear AC on the higher trims… I don't think it's related to the dreaded VCM, also on the higher trims.

juan Rivera says:

NO words but still like this video

Jonny Cat says:

will this work on a second gen?

Ethan Webb says:

Can routing the belt all be done from the top?

blkfelt says:

Great video . .. straight to the point,

Rich Wachtel says:

Can you upload a front wheel bearing replacement before sunday? 😉

thurman says:

Quick and easy. I kind of had to route the belt from underneath once. You need that diagram to replace. I got a copy on my phone in my notes.

If you have a breaker bar 3/8. Then you won’t need that drive belt thingy.

Comments are disabled for this post.