How to Replace Rear Brakes 1997-2003 Ford F-150

How to Replace Rear Brakes 1997-2003 Ford F-150

Buy Now!
New Brake Pad & Rotor Kit from

This video shows you how to install new, quality TRQ brake pads and rotors on your 1997-2003 Ford F-150. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This process should be similar on the following vehicles:
1997 Ford F-150
1998 Ford F-150
1999 Ford F-150
2000 Ford F-150
2001 Ford F-150
2002 Ford F-150
2003 Ford F-150

Tools you will need:
• Pry Bar
• 10mm Wrench
• 21mm Socket
• 1/2 Inch Air Impact Gun
• Torque Wrench
• Anti-Seize Grease
• Brake Grease
• Brake Parts Cleaner
• sanding disc


Check out our playlist:
Ford F-150 10th Generation 1997-2003:

While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



Comments are disabled for this post.