How to Replace Impact Airbag Sensor 2007-2013 Chevrolet Silverado

How to Replace Impact Airbag Sensor 2007-2013 Chevrolet Silverado

Buy Now!
New Impact Airbag Sensor from

This video shows you how to install an impact airbag sensor on your 2007-2013 Chevrolet Silverado. The front impact sensor is part of the airbag system in your truck or SUV. A failed sensor will prevent the airbag from deploying properly in an accident and will trigger the airbag light in your dash.

This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500

Tools you will need:
• 10mm Wrench
• 13mm Socket
• 15mm Socket
• 1/4 Inch Ratchet
• 3/8 Inch Drive Ratchet
• Gloves
• Safety Glasses


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto
√ Do it Yourself
√ Save Money

Comments are disabled for this post.