Car Fix DIY Videos

To change out windshield wiper blades on a 2008-2012 Chevy Malibu, follow these steps:
Tools & Materials Needed:
New wiper blades (Size: 24″ for the driver side, 21″ for the passenger side)
A towel (to protect the windshield from accidental blade snap-back)
Step-by-Step Instructions:
1. Lift the Wiper Arms
Turn off your car and make sure the wipers are in their resting position.
Gently lift each wiper arm away from the windshield until it locks in an upright position.
2. Remove the Old Wiper Blades
Locate the small release tab where the wiper blade connects to the wiper arm.
Press and hold the release tab while sliding the blade downward to detach it from the J-hook (common on these models).
Carefully remove the old blade.
3. Attach the New Wiper Blades
Take the new wiper blade and align it with the J-hook on the wiper arm.
Slide the new blade up into the J-hook until you hear a click, ensuring it’s securely attached.
4. Lower the Wipers Gently
Slowly lower the wipers back onto the windshield.
Avoid letting them snap down, as this can crack the glass.
5. Test the Wipers
Start the car and test the wipers to ensure they move smoothly and clear the windshield properly.
Tips:
If the new blades don’t attach easily, double-check that you purchased the correct size and type.
Some wiper brands come with adapters—ensure you’re using the correct one for a J-hook connection.
Replace your wiper blades every 6-12 months for optimal performance.

Disclaimer: As an Amazon Associate I earn from qualified purchases.