How To Replace Front Bumper 2008-2017 Buick Enclave

How To Replace Front Bumper 2008-2017 Buick Enclave

Shop for New Auto Parts at

This video shows you how to install a bumper cover on your 2008-2017 Buick Enclave. TRQ bumper covers are exact replacements for your vehicle’s factory bumper cover. If your bumper cover was damaged or lost, this video will help you save money by installing a new one yourself!

This process should be similar on the following vehicles:
2008 Buick Enclave
2009 Buick Enclave
2010 Buick Enclave
2011 Buick Enclave
2012 Buick Enclave
2013 Buick Enclave
2014 Buick Enclave
2015 Buick Enclave
2016 Buick Enclave
2017 Buick Enclave

Tools you will need:
• 10mm Socket
• 22mm Socket
• 7mm Socket
• Trim Tool Set
• T20 Socket
• Socket Driver
• Torque Wrench


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

√ Watch the Video

√ Buy The Part at 1A Auto

√ Do it Yourself

√ Save Money

Comments are disabled for this post.