How to Replace Rear Sway Bar Link 2007-2013 Acura MDX

How to Replace Rear Sway Bar Link 2007-2013 Acura MDX

Buy Now!
New Sway Bar Link from

This video shows you how to install new TRQ sway bar links on your 2007-2013 Acura MDX. Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle.

This process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX

Tools you will need:
• 14mm Wrench
• 17mm Wrench
• 14mm Socket
• 22mm Socket
• Crowfoot Wrench
• Locking Pliers
• Ratchet
• Socket Extensions
• Swivel
• Torque Wrench
• 5mm Hex Socket


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto
√ Do it Yourself
√ Save Money

Comments are disabled for this post.