How to Replace Rear Sway Bar Link 2004-2008 Acura TL

How to Replace Rear Sway Bar Link 2004-2008 Acura TL

Buy Now!
New Sway Bar Link from

This video shows you how to install new TRQ rear sway bar links on your 2004-2008 Acura TL. Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle.

This process should be similar on the following vehicles:
2004 Acura TL
2005 Acura TL
2006 Acura TL
2007 Acura TL
2008 Acura TL

Tools you will need:
• 14mm Wrench
• 19mm Socket
• Blowtorch
• Cutoff Wheel
• 3/8 Inch Air Impact Gun
• Ratchet
• Torque Wrench
• Rust Penetrant
• 5/16 Inch Allen Wrench


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

√ Watch the Video

√ Buy The Part at 1A Auto

√ Do it Yourself

√ Save Money

Comments are disabled for this post.