How to Replace Rear Exhaust Manifold Catalytic Converter Assembly 2004-2008 Acura TL

How to Replace Rear Exhaust Manifold Catalytic Converter Assembly 2004-2008 Acura TL

Buy Now!
New Exhaust Manifold Catalytic Converter Assembly from

This video shows you how to install a rear exhaust manifold catalytic converter assembly on your 2004-2008 Acura TL. This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding.

This process should be similar on the following vehicles:
2004 Acura TL
2005 Acura TL
2006 Acura TL
2007 Acura TL
2008 Acura TL

Tools you will need:
• Flat Blade Screwdriver
• Phillips Head Screwdriver
• Pry Bar
• 14mm Wrench
• 17mm Wrench
• 10mm Socket
• 11mm Socket
• 12mm Socket
• 14mm Socket
• 17mm Socket
• 19mm Socket
• 36mm Socket
• Blowtorch
• Coolant Funnel Set
• O2 Sensor Socket
• Trim Tool Set
• Bent Nose Pliers
• Hose Clamp Pliers
• Pliers
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet
• Ratchet
• Socket Driver
• Socket Extensions
• Torque Wrench
• Anti-Seize Grease
• Brake Grease
• Bungee Cord
• Gloves
• Hose Clamp
• Paper Towels
• Rust Penetrant
• Safety Glasses
• Brass Punch
• Drain Pan
• Hammer
• Jack Stands
• Pick
• Sledge Hammer


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

√ Watch the Video

√ Buy The Part at 1A Auto

√ Do it Yourself

√ Save Money

10365211 says:

Can my cat touching the subframe make my car overheat in freeway

billy miller says:

Was the half shaft and axel already removed???

Erazner photography says:

Do you didn’t even replace the whole thing

Comments are disabled for this post.