How to Replace Rear Brake Caliper 2007-2013 Acura MDX

How to Replace Rear Brake Caliper 2007-2013 Acura MDX

Shop for New Auto Parts at

This video shows you how to a (front/rear)brake caliper on your 2007-2013 Acura MDX. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.

This process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX

Tools you will need:
• Pry Bar
• 19mm Wrench
• 12mm Socket
• 14mm Socket
• 17mm Socket
• 22mm Socket
• Brake Caliper Hanger
• Pliers
• Ratchet
• Socket Extensions
• Torque Wrench
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags
• Drain Pan


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto
√ Do it Yourself
√ Save Money

Comments are disabled for this post.