How to Replace Front Passengers Side CV Axle 2007-2013 Acura MDX

How to Replace Front Passengers Side CV Axle 2007-2013 Acura MDX

Buy Now!
New CV Axle Assembly from

This video shows you how to install a new Front Passengers Side CV Axle in your 2007-2013 Acura MDX. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

This process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX

Tools you will need:
• Flat Blade Screwdriver
• Pry Bar
• 19mm Wrench
• 22mm Socket
• 36mm Socket
• Crowfoot Wrench
• Pickle Fork
• Needle nose pliers
• Needle nose pliers
• Ratchet
• Socket Extensions
• Torque Wrench
• Brake Grease
• Center Punch
• Floor Jack
• Hammer
• Jack Stands
• Pick
• Rubber Mallet
• Wheel Chocks


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto
√ Do it Yourself
√ Save Money

Comments are disabled for this post.