How to Replace Front Inner Fender Liner 2004-2008 Acura TL

How to Replace Front Inner Fender Liner 2004-2008 Acura TL

Buy Now!
New Inner Fender Liner from

This video shows you how to install a new fender liner on your 2004-2008 Acura TL. Fender liners protect the body and engine compartment of your vehicle from road debris, water, dirt, sand, and the like. If yours is worn, ripped, damaged, or missing, it’s a good idea to install a new one to protect your vehicle.

This process should be similar on the following vehicles:
2004 Acura TL
2005 Acura TL
2006 Acura TL
2007 Acura TL
2008 Acura TL

Tools you will need:
• Phillips Head Screwdriver
• 10mm Socket
• 19mm Socket
• Cutoff Wheel
• Trim Tool Set
• Bent Nose Pliers
• 3/8 Inch Air Impact Gun
• Ratchet


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

√ Watch the Video

√ Buy The Part at 1A Auto

√ Do it Yourself

√ Save Money

Juan Ornelas says:

What size are the replacement liner retainers. 8mm or 10mm

Eduardo Alvarez says:

TRQ thank you so much for your vids. I am saving myself alot of stress and money you guys are awesome thanks again.

Comments are disabled for this post.