How to Replace Front Brakes 2004-2008 Acura TL

How to Replace Front Brakes 2004-2008 Acura TL

Buy Now!
New Brake Pads from

This video shows you how to install front brake pads and rotors on your 2004-2008 Acura TL. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This process should be similar on the following vehicles:
2004 Acura TL
2005 Acura TL
2006 Acura TL
2007 Acura TL
2008 Acura TL

Tools you will need:
• Flat Blade Screwdriver
• Impact Screwdriver
• Pry Bar
• 10mm Socket
• 14mm Socket
• 19mm Socket
• Brake Caliper Compressor Tool. Single Piston. Lever Style.
• Brake Caliper Hanger
• 3/8 Inch Air Impact Gun
• Ratchet
• Brake Grease
• Soft-Bristle Brush
• Hammer
• Pick
• Wire Brush


Check out our playlist:
Acura TL 2004-2008 3rd Generation:

While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

√ Watch the Video

√ Buy The Part at 1A Auto

√ Do it Yourself

√ Save Money

Comments are disabled for this post.