1966-67 Chevrolet Chevelle (Malibu & Super Sport SS). Quarter window removal. The process should also be applicable to other GM A-body models; GTO, Lemans, and Skylark. Check out my other videos for installation of the quarter window and removal/install of the door window and vent/wing window. Keep checking back for new videos that document my […]
Donate to Forge Garage here: https://www.forgeflint.org/donations The ignition mechanism in “Sally” the 1971 Chevrolet Chevelle SS stopped working properly. In Part 1, I disassembled the steering column and figured out the culprit. Now we put it back together and get it back in the car. Finally! This would apply to a bunch of 70s eras […]
in this video, I show you the Problems I had installing how the upper cowl panel in my 68 GTO. I used an aftermarket cowl panel. Bolt location and other problems. if you have any questions just leave a comment and I should be able to get back to you in a timely fashion.
This is part one on how to install a vintage air system for do it your selfers at home we are doing this on a daily driver condition 1967 Chevrolet El Camino this video will help Chevelle owners as well as I believe these years of GM A Bodys in general. Part one will be […]
door is from a 70 chevelle, should be the same for 68-72 a bodies… but im not 100% SURE thanks for watching and please subscribe if you like the video
We are going to show you how to set up your 1964 to 1967 Chevelle shifter for any GM automatic you want to use by using the Shiftworks cable conversion kit!!!!
just an idea on what to expect when getting ready to put your gas tank back in you either redo all your evap / vent lines or you plug them off and run a vented gas cap….some pre 70 cars will not have vents /evap lines so watch my removal video if you dont know […]
car is a 70 chevelle 2 door hard top drive shaft is a factory muncie 4 speed measuring 55.5″ from center of u joint to center of u joint…. WILL be the same for TH350 and borg warner t10 and super t10 ive never owned a TH400 so i dont know just an idea on […]
car is a 70 chevelle.. just an idea on what to expect and how to go through you 68-70 quad headlight set up.. thanks for watching and please like and subscribe if you enjoyed the video
car is a 70 chevelle, main focus is the parts checklist needed to do this correctly…. thanks for watching and please subscribe and like the video, thank you
In this video, I show you how to do a brake job on a 1970 Oldsmobile Cutlass. This will be similar to a Chevelle, Camaro, and other A Body GM Vehicles. This will include the Master Cylinder, Brake Booster, Calipers, and Brake Pads.
Installing a new reproduction floor pan for a 68 GTO. This installation would be the same 64 -72 GM. Chevelle, GTO, LeMans, any questions leave a comment and I’ll get back to you soon as I can. Please don’t forget to subscribe and support my channel. Thank you!!
im not 100% sure what years these seat belts were…. just an idea on how to save some bad ones…. thanks for watching and please like and subscribe if you enjoyed the video
all my videos are in 1080p HI DEF so check that out… this video is for the beginner.. im just giving you an idea on how to put an engine in and get it started…. thanks for watching and please subscribe… THANK YOU
just an idea on how to go through your GM mechanical horn realy system… car is a 70 chevelle with dual horns…
https://www.1aauto.com/trunk-weatherstrip-seal/i/1awst00037?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=ikBDF4xRdw8 1A Auto shows you how to repair, install, fix, change or replace a weather strip that is falling down, coming apart, or the adhesive is failing. This video is applicable to the 66 Pontiac Ventura and many GM models from the 50s, 60s, and 70s, including the Chevelle, Camaro, GTO, Firebird, Catalina, Caprice, Skylark, […]
ALL MY VIDEOS ARE IN 1080p HI DEF so check that out…. application for brackets is 69-70 chevelle big block with LONG WATER PUMP the lines are 71-72 style BUT when you buy the pressure line you may only find this style at local parts houses in my opinion the hoses look better like this […]
this package tray fits 68-72 chevelle and 70-72 monte carlos, maybe other years too dimensions are at the end of the video just an idea on how i made a rear package tray for my 70 chevelle thanks for watching and please subscribe
How to replace change remove install control arm bushings impala camaro gta trans-am ls1 cutlass gm chrysler lincoln mercury toyota nissan honda saturn chevy chevrolet corvette biscayne cadillac…
This video is about Fixing Camber Alignment problems on Chevelle, GTO’s Old Cutlass, Buick GS, and other A-Bodies.
This video is about Fixing Camber Alignment problems on Chevelle, GTO’s Old Cutlass, Buick GS, and other A-Bodies.
This video is about Fixing Camber Alignment problems on Chevelle, GTO’s Old Cutlass, Buick GS, and other A-Bodies.
This video is about Fixing Camber Alignment problems on Chevelle, GTO’s Old Cutlass, Buick GS, and other A-Bodies.
Doing the front lower control arm bushings on my 1973 Chevelle. However this technique would work on any similar type of solid rubber bushing that is found o…
Here’s the next video showing me battling it out removing my older upper control arm bushings from my 1973 Chevelle. My new favorite tool is in use, the prop…
http://www.1aauto.com.