Car Fix DIY Videos

►If your Volvo’s suspension is feeling “bouncy” or “loose,” it can likely be attributed to blown or worn shock absorbers. The purpose of a shock absorber is to dampen the recoil of the coil spring as your car travels over dips and bumps in the road. When your shock absorbers start to fail, you may notice noise from the front end over bumps, squeaks, visible leaks around the shocks, and overall poor handling of the vehicle. Jay Van Gorden is here to walk you through the steps needed to remove and replace the rear shocks on your Volvo P3 chassis vehicle.

Read this DIY on our blog: https://blog.fcpeuro.com/how-to-replace-the-rear-shocks-on-your-volvo-s60-volvo-p3-s80-v60-v70-xc60-xc70

This Shock Replacement video pertains to these vehicles:
2007-2016 S80
2008-2010 V70
2008-2016 XC70
2010-2017 XC60
2011-2018 S60
2014-2018 V60

Shop The Parts Used In This Video:
https://www.fcpeuro.com/products/volv…

https://www.fcpeuro.com/products/volv…

This Part Fits The Following Vehicles:
Volvo XC60
2010 Volvo XC60 Shock Absorber
2011 Volvo XC60 Shock Absorber
2012 Volvo XC60 Shock Absorber
2013 Volvo XC60 Shock Absorber
2014 Volvo XC60 Shock Absorber
2015 Volvo XC60 Shock Absorber
2016 Volvo XC60 Shock Absorber

Index:
Intro 00:00
Remove the wheel 01:25
Remove the shock mounting bolts 01:30
Install the new strut mount 02:37
Install the new shock assembly 03:17
Refit the wheel 04:41

SUBSCRIBE: https://hubs.ly/H0cDnfN0

Get free parts from FCP Euro:
https://www.fcpeuro.com/page/lifetime…

Follow FCP Euro on:
https://www.facebook.com/fcpeuro
https://www.instagram.com/fcpeuro/
https://twitter.com/fcpeuro
https://www.fcpeuro.com/