Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/24/aW/windshield-wiper-motors
1A Auto shows you how to repair, install, fix, change or replace a damaged, bent, or failing rear windshield wiper arm. This video is applicable to 2010 Volvo XC60.
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oaj4/1AXAA00013
• 13mm Socket http://1aau.to/o6y/1AXAA00015
• Ratchet http://1aau.to/oamr/1AXAA00016
For More Info visit us at http://1aau.to/h/bjm/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Does unscrewing the nut not need a counterforce, to hold the wiper shaft ?
What to do in case when nut is seized on the wiper motor shaft??
Don’t use screwdriver to open that cap! There is a special pin in the back to release. Otherwise you will scratch it. As I did.
Don't you sell these. I can't find the part in your on line catalogue.
Taught me… Thank you