Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/84/G/axles-and-axleshafts
In the video, 1A Auto shows how to replace a driver side axle. The video is applicable to the 00, 01, 02, 03, 04, 05, 06, 07 Volvo V70.
🔧 List of tools used:
• Pry Bar http://1aau.to/teM/1AXAA00020
• 18mm Wrench
• 14mm Socket http://1aau.to/tW6/1AXAA00015
• 18mm Socket http://1aau.to/tmK/1AXAA00043
• 19mm Socket http://1aau.to/tmK/1AXAA00043
• Axle Fork
• T40 Torx Bit http://1aau.to/tmN/1AXAA00008
• 1/2 Inch Breaker Bar http://1aau.to/thB/1AXAA00078
• Ratchet http://1aau.to/tRn/1AXAA00016
• Socket Extensions http://1aau.to/tW6/1AXAA00015
• Torque Wrench http://1aau.to/tqx/1AXAA00044
• Rust Penetrant
• Center Punch http://1aau.to/tca/1AXAA00055
• Floor Jack http://1aau.to/trm/1AXAA00068
• Hammer http://1aau.to/tiQ/1AXAA00091
• Jack Stands http://1aau.to/trJ/1AXAA00065
• Wire Brush http://1aau.to/tdw/1AXAA00079
For More Info visit us at http://1aau.to/h/aLb/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Very nice video, as other that I see from 1Aauto, I have a v70II_2006 and your information and professionalism is very appreciate.
nice job… I appreciate her using manual tools to not only show the ease, but also the finesse.
OTC makes a special tool for the ball joints, far superior
Great video! How much lift is acceptable on the shaft where it comes out of the transmission? Mine has about 2mm of lift. I fear the end of the shaft where the circlip is has snapped.
You dont need to lose all that parts to change axle on this car. You only need to lose the centerbolt and those two strut bolts.
Will this work with a 04 xc70 2.5t. It’s a P2
You have a lift but aren’t using air tools? Good video though, very informative.
Can u help me find air vents for a 2010 Dodge Avenger Chrysler doesn’t supply them anymore