How to change front springs / front coil springs on VOLVO V70 2 (SW) [TUTORIAL AUTODOC]

How to change front springs / front coil springs on VOLVO V70 2 (SW) [TUTORIAL AUTODOC]

How to change front springs / front coil springs / front suspension springs on VOLVO V70 2 (SW) 2.0 Estate 11.1999–12.2008 [TUTORIAL AUTODOC]

Springs on VOLVO V70 I (LV) (03.1999 – 12.2000) / VOLVO S60 I (07.2000 – 04.2010) / VOLVO S40 I (VS) (07.1995 – 2004) / VOLVO S70 (LS) (11.1996 – 11.2000) / VOLVO C70 I (03.1998 – 10.2005) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.

🔝 Top brands that produce springs: KYB, LESJÖFORS, STARK, MONROE, RIDEX..

📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App — https://interstitials.onelink.me/1036709825?pid=Youtube

🛒 On our website you will find a wide range of auto parts you are interested in: https://goo.gl/YZLRQq
Springs: https://www.autodoc.co.uk/car-parts/coil-springs-10213?utm_source=YouTube&utm_medium=description&utm_campaign=2073_ersatz1
Springs for VOLVO V70 2: https://www.autodoc.co.uk/car-parts/coil-springs-10213/volvo/v70/v70-ii-sw?utm_source=YouTube&utm_medium=description&utm_campaign=2073_ersatz2

LIQUI MOLY Chain Spray: https://www.autodoc.co.uk/liqui-moly/9678170?utm_source=YouTube&utm_medium=description&utm_campaign=2073
WD-40 Grease Spray: https://www.autodoc.co.uk/wd-40/13563346?utm_source=YouTube&utm_medium=description&utm_campaign=2073
LIQUI MOLY Fast Cleaner: https://www.autodoc.co.uk/liqui-moly/13481014?utm_source=YouTube&utm_medium=description&utm_campaign=2073

All video and pdf tutorials on BMW 330i parts replacement: download and watch at AUTODOC CLUB – https://club.autodoc.co.uk/manuals/volvo/v70

🔔 Subscribe to AUTODOC’s channel and don’t miss new videos on car parts replacement ➜ https://www.youtube.com/c/AutodocUk?sub_confirmation=1

🛠️ The tools you need to replace front springs:
– wire brush
– WD-40 spray
– brake cleaner
– copper grease
– combination spanner no. 18
– drive socket no. 13
– drive socket no. 18
– drive socket no. 21
– HEX bit no.H6
– wheel impact socket no.19
– ratchet wrench
– torque wrench
– water pump pliers
– tap wrench
– crow bar
– hydraulic strut spring compressor
– hydraulic transmission jack
– wheel chock
– fender cover

Was this video helpful? Give it a thumbs-up and share it with your friends!

Have a look at other videos on our channel:
► VOLVO car repair tutorial — https://www.youtube.com/playlist?list=PLWep5LzT0sxky9jB9WYo8WXYuzAzlsHEv
► VOLVO V70 2 car repair tutorial — https://www.youtube.com/playlist?list=PLWep5LzT0sxloA0xYVQje1FSXdzErPHxD
► How to replace rear anti roll bar link / rear drop link on VOLVO V70 2 (SW) — https://www.youtube.com/watch?v=DkKRm_WhVyU&list=PLWep5LzT0sxloA0xYVQje1FSXdzErPHxD&index=2&t
► How to replace rear brake pads / rear brake pad set on VOLVO V70 2 (SW) — https://www.youtube.com/watch?v=21TVF2Zj5n8&list=PLWep5LzT0sxloA0xYVQje1FSXdzErPHxD&index=3&t

Mobile Shop: https://m.autodoc.co.uk

📢 AUTODOC in social media:
Facebook: https://www.facebook.com/autodoc.co.uk
Twitter: https://twitter.com/autodoc_berlin
YouTube: https://www.youtube.com/c/AutodocUk
Instagram: https://www.instagram.com/autodoc_autoparts

#autodoc #autodoctutorial

Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.

It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.

This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.

© 2019 AUTODOC GmbH All rights reserved

8,783
Like
Save


Comments

Jaro Jed says:

Sorry but where is camber setting? On the top suspension nut you have bean, not circle. You need to measure distance before removal and set the same value after replacement. Otherwise you will need to set geometry again. Apart from that, very good video, showing everything clear.

Peppermint says:

6:00 notice how the cross nut goes, with the cross at the top – this way it won't loosen up while driving. Also, before installing the strut at 7:18 look underneath the car at the strut tower, right at the top where the strut plate will sit: this area gets rust from cracked paint and if left untreated, it will pierce and completely ruin the strut tower chassis (car goes to scrap). Placing the lower strut bolts is very difficult if you have a new control arm: ask someone to stand on the wheel hub to push it down with his body weight, while you insert a screwdriver to lock the strut holes aligned

Tomasz Raczyła says:

To much cooper grase

Comments are disabled for this post.