This simple guide shows how to upgrade/replace the door speakers on a VW Polo and includes part numbers for any adapters needed along with any tools to make the job go smoothly.
This simple guide shows how to upgrade/replace the door speakers on a VW Polo and includes part numbers for any adapters needed along with any tools to make the job go smoothly.
Comments are disabled for this post.
Hello what size of speakers i need? Thank you in advance
Does the mounting ring and the adapter come with the speakers?
Great video, would you be able to do one for a mark 5 polo?
My speakers came with a mounting kit would you suggest getting different ones
I have a polo 2007 with no speakers on back doors , what size shuld i get the speakers to fit with no kit
Me vector wtf
I've found that the factory speakers are powerful enough to send all the mirrors vibrating like crazy in the first place anyway
Hi, your videos are really insightful! Do you have one of a stereo removal and refitting of a MK4 Polo?
how would you do the rear door speakers as mine dont have any at all
Sorry for the stupid question but will this method apply to a 2006 polo ?
One issue though… this video is only for the passenger side… the driver side is substantially different when taking the door handle/cables/etc off. Rest I assume it's the same. Would've helped even more to have a video for both sides.
Extremely useful video… I've got a 2005 VW Polo too and this video has given me a lot of confidence before undertaking the job. One addition I'd make would be to use this opportunity to add some sound deadening material/foam in the recess behind the speaker and on the door between the panels. You won't regret it.
I have replaced the speakers with the help of this video and another due to the difference of the driver and passenger doors. I installed 16,5cm speakers but they do not fit out of the box since they are slightly larger than the original ones. On the inside of the door card where the speaker would sit there is some plastic sticking out, not sure what it is intended for but I had to cut it away with a multi-tool. After that the door card was able to close.
Really helpful. Thank you