I restore broken connections from the pcb using crimp ferrules and pot it with flowable silicon to protect the delicate wires
I restore broken connections from the pcb using crimp ferrules and pot it with flowable silicon to protect the delicate wires
Comments are disabled for this post.
what transmission was this? I suspect that my DSG 02E transmissions TCM is failing too, so much electrical error messages and goes into limp mode all the time.. also the round connector cable side of the transmission, was loose, but I locked it back in place and still the fault codes came back after 3-4 km driving.. 18154 – Transmission Solenoid Power Relay , 17150 – Shift Solenoid 4 (N91) P0766 – 000 – Open or Short to Ground – Intermittent, 17145 – Shift Solenoid 3 (N90) P0761 – 000 – Open or Short to Ground – Intermittent….
Greetings
It worked?
I have 2 mechatronic units to verify
Both from my car.
Really pain in the but when it broke
Did you soldered with aluminium or tin wire