Today we are installing the sliding rear cargo deck back into the 4Runner. I had previously removed this to install some aftermarket truck bed drawers. This step-by-step installation shows how to return to the OEM sliding cargo deck system. Before installing the drawers I lined the cargo area with sound deadening material so your cargo area might look slightly different. To start remove all carpet and get down to the bare unlined floor before preceding with the install. The OEM sliding cargo area consists of Hardware, storage box, brackets right and left, storage box, storage box lid, cargo deck frame/sliding mechanism, carpet and deck. Installation took just under an hour to complete.
Rail assembly 58400-3501
Tray assembly 58410-35020-c2
Bottom carpet assembly 58570-35160-c1
Anchor assembly (×2) 64722-35010-c0
Tray cover left 58704-35010-c2
Tray cover right 58703-35010-c2
Floor cover box 58480-35041-c2
Slide bracket left 58457-35010
Slide bracket right 58456-35010
Total cost new could be north of $1400 however I have seen well cared for used ones in the $500-$600 Range.
This Oem sliding tray can be modified to fit almost any need.
#4runner #toyota4runner #diy
){kind=link}
Comments
Comments are disabled for this post.