How to Replace Front CV Axle 03-09 Toyota 4Runner

How to Replace Front CV Axle 03-09 Toyota 4Runner

Buy Now!
New CV Axle Shaft from 1AAuto.com http://1aau.to/ia/1AACS00064

1A Auto shows you how to repair, install, fix, change or replace broken, worn, or vibrating CV axles. This video is applicable to the 03, 04, 05, 06, 07, 08, 09, Toyota 4Runner.

🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/tazJ/1AXAA00013
• Pocket Screwdriver
• Pry Bar http://1aau.to/te4/1AXAA00020
• 17mm Socket http://1aau.to/takn/1AXAA00015
• 18mm Socket http://1aau.to/tse/1AXAA00043
• 21mm Socket http://1aau.to/tse/1AXAA00043
• 36mm Socket http://1aau.to/tp/1AAST00006
• Side Cutters
• 1/2 Inch Breaker Bar http://1aau.to/thP/1AXAA00078
• Ratchet http://1aau.to/taeg/1AXAA00016
• Socket Extensions http://1aau.to/takn/1AXAA00015
• Torque Wrench http://1aau.to/tqM/1AXAA00044
• Anti-Seize Grease
• Center Punch http://1aau.to/tcg/1AXAA00055
• Floor Jack http://1aau.to/trA/1AXAA00068
• Jack Stands http://1aau.to/trY/1AXAA00065
• Large Hammer http://1aau.to/ti7/1AXAA00091
• Rubber Mallet http://1aau.to/tah/1AXAA00413

For More Info visit us at http://1aau.to/h/bwx/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

4,631
Like
Save


Comments

Isaac Ortiz says:

Great video, thank you.

schwazman1 says:

You should advise ALWAYS replacing cotter pins. It's not worth the few pennies and the convenience of not running to the store to compromise safety.

C L says:

I was starting to wonder if you were going to mention that horrible backing plate.

Joseph Holmberg says:

Instead of bonks i like to use ugga buggas

Ivan Mejia says:

Thanks for your videos

Comments are disabled for this post.