Car Fix DIY Videos

Fixing the dreaded Taco Lean – Toyota Tacoma 2nd and 3rd gen using a simple spacer.

Even though the TRD PRO Bilstein had an adjustment for the infamous taco lean, I still had a lean of over 1/2 an inch.

I decided to buy the Headstrong spacer because of their good quality and price. The material is aluminum so there’s zero chance of corrosion even if the powdercoat fails. link here: https://www.headstrongoffroad.com/store/p31/HS_1%2F4%22_Top_Plate_Spacer_-_TT05514-TPS.html

I had to basically take the suspension apart like doing an install to get the spacer to fit so this is as good overview too.

here’s my vlog about the install:https://youtu.be/9mdo-GnoVhY

this is my follow up video: https://youtu.be/hUzNmDc-h0w

Items used to record this video

Samsung Galaxy S8+ http://amzn.to/2wCFA4M
smooth q mobile phone stabilizer http://amzn.to/2vuX5Ho
Canon 5D Mark III http://amzn.to/2w92vpn

—————————————–

Please check out my blog at http://robdaman.blogspot.com and instagram @_robdaman

______________
Disclaimer:
Due to factors beyond the control of Rob Daman, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control , no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Rob Daman.