Buy Now!
New Inner Fender Liner from 1AAuto.com https://trq.video/ia-1ABMX04056
This video shows you how to install new inner fender liners from TRQ on your 2010-2014 Subaru Outback. Fender liners protect the body and engine compartment of your vehicle from road debris, water, dirt, sand, and the like. If yours is worn, ripped, damaged, or missing, it’s a good idea to install a new one to protect your vehicle.
This repair was done on a 2012 Subaru Outback 2.5i 2.5L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2010 Subaru Outback
2011 Subaru Outback
2012 Subaru Outback
2013 Subaru Outback
2014 Subaru Outback
Tools you will need:
• Phillips Head Screwdriver https://trq.video/obFz-1AXAA00013
• 10mm Socket https://trq.video/obFs-1AXAA00017
• 19mm Socket
• Trim Tool Set https://trq.video/oav5-1AXXX00006
• Circlip Pliers
• Ratchet https://trq.video/ob7s-1AXAA00016
• Torque Wrench https://trq.video/oa9Y-1AXAA00044
• Gloves https://trq.video/oa2Q-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oawg-1AXAA00068
• Jack Stands https://trq.video/oaih-1AXAA00065
• Wheel Chocks
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
Check out our playlist:
Subaru Outback 3rd Generation 2010-2014: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-dW1LK3u7qNsNk0rPK_kIY
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Can you tell me where I can get the set of pliers you're using, or maybe the brand? Thank you.
Do they need to remove a front inner fender liner when they replace a sub frame? Or bushes?
Do I have to have this on a lift or can I just use my jack
Do a video on how to open the rear door with a broken handle on a 04 Nissan Sentra