How to Install Bi-Xenon HID: Subaru Impreza WRX 2001-06

How to Install Bi-Xenon HID: Subaru Impreza WRX 2001-06

http://www.xenonsupply.com/subaru-wrx-xenon-package.html How to Install Bi-Xenon HID’s on a Subaru WRX Do it Yourself Installation of HID Xenon Headlights on…

60
Like
Save


Comments

DJInclined says:

lol that battery is pathetic

ivngmc says:

I wonder if this process would be the same for aftermarket headlights for the 02-03 wrx :/

Jayeeyee says:

2004/05 WRX uses H1 bulbs as driving lights.

1importedguy says:

i have a 2003 outback is it basically the same thing right

David Matic says:

hi there hope you can help I had my 06 installed HID lights em i suppose to have my drl disconnected. It seem one of my ligth sometimes not work and sometimes work. What steps can i do to trouble shoot? Many thanks, Bernard_matic @yahoo.com

XenonSupply says:

Have you already purchased your HID kit for the fog light or are you looking to get matching sets for your lows and fogs?

XenonSupply says:

These will look almost identical to the Sotck HID’s on the STI. 4300K is the stock color from the manufacturer, and 6000K gives it a bit more of an aggressive look with a very slight tint of blue.

If you have additional questions please let us know at Help(at)XenonSupply(dot)com or call us toll free at 1-800-840-3240

Thank you,
XS Team

Krimghor says:

Will these HiDs look exactly the same as the ones in the STi or will they look different/worse?

PocketDrummer says:

Is there a way to match the color for the fog lights?

XenonSupply says:

Ballasts do not get very hot at all and have aluminum casings for cooling

XenonSupply says:

Sorry for the late response! We have a harness and capacitor that will allow you to run the HID’s off the low beam without issues related tot he DRL. contact us at Help(at)XenonSupply(dot)com for additional info.

Flysohighx21 says:

Do the ballasts get hot?

Jesse James says:

Great video I only wish it were so simple for my car. I have a 2007 Impreza Outback Sport which has the DRL’s on the low beams. Do you make a product that can disable the DRL’s on the low beams so I can install one of your HID kits. Or better than that do you have something that would allow me to switch the DRL’s over to the high beams?

XenonSupply says:

No, disabling the DRL does not in any way affect the high beam functionality.

Glad to hear your install went well.

whit6680 says:

I’ve just installed the bixenon kit on my 2003 wrx.
I was running a single beam kit and disabled the DRLs to prevent the bulbs burning out from receiving inadequate voltage. Does disabling the DRLs disable the highbeams as well?
Great video, made installation very easy!

XenonSupply says:

The 2002 uses the same kit as shown in the video. Email us at Help(at)XenonSupply(dot)com and we can send you a direct link to the product.

XenonSupply says:

Yes, a similar kit can be used however, we cannot assist you when there are issues or installation problems as every kit is different in comes in varying quality.

Brandon Nguyen says:

I have a 2002 2.5ts and would like to install bi-xenon 5k hids. im not sure if my high and low beams are the same bulb or not to know which kind of hids to get. also, if i install these, will there be a glare?

jantzen8895 says:

Would i be okay to use a similar kit since the bulbs on my 98 legacy are 9007 also? Would i need projectors or could i use the stock housing?

XenonSupply says:

To our knowledge the DRL runs off the high beam so a low beam conversion will work out just fine!

bigdaddy6879 says:

Ok….My boy has a 2007 Impraeza wagon and wanted to do an HID upgrade. Will he need the realy or any additional accessories to be able to run the kit with the daytime running lights?

XenonSupply says:

THe 07 uses the H7 bulb type and will not require a harness.

XenonSupply says:

The H4-3 Bi-Xenon HID kit will work for your vehicle. We do sell an high end H4 BiXenonSystem as well as provide tutorials for this type of installation. If you have additional questions just let us know at Help(at)XenonSupply(dot)com

TommiMcOwie says:

Would I be able to get Bi-Xenon for my 1998 Subaru Impreza RX? It uses H4 for the headlights and H3 for the fog lights I think. I was planning on buying the Xetronic Digital G2 Lighting System, it’s a high end bi-xenon HID kit basically.

Rothrock says:

what about a 07 2.5i, will i need harness?

Write a comment