Buy the hatch release kit here: https://www.etsy.com/OuterlandFabrication/listing/797288139/subaru-interior-hatch-release-button-diy
Check out my IG: http://instagram.com/puddletrek
This design was inspired by the hatch switch design by Steve over at SMK Fabrication (https://smkfabrication.com). This mod is for anyone who has ever been camping in their Subaru and wants to be able to get in and out through the hatch easily and have a clean and intuitive place to put a hatch release switch.
The hatch release switch kit comes with the button/baseplate/wires already assembled and includes wire taps; everything you need to complete this project!
If you didn’t want to buy the kit, you could always drill into the OEM interior hatch plug and add your own button, shroud, and wiring.
If you’ve got a printer and you’re interested in printing the design yourself here’s the link: https://www.thingiverse.com/thing:4343188
Yo bro u still sell those switch I can't find it on etsy
I leave my side piece at her house. LOL
Thanks for sharing man. I need this for when I’m camping.
The wiring part is kinda dark and hard to see 🙁
Also the link to the kit doesn't work. Do you know where I can purchase the button alone ?
There was a easier way
One suggestion if I might, I would put a small connector between your new switch and the splice so that you can simply unplug from your switch and get the panel out of the way if you ever have to work on the area again. Having the panel hard wired into the existing harness could really become a nuisance during and subsequent work.
The balance of your design is awesome and your 3d printed solution is elegant and well conceived. I'm going to have to replace the existing primary switch here soon and I'll be ordering one of your kits soon.
Cheers and good work …
How to buy?
This won't work if the trunk is locked, correct?
Good idea,
But you don't ship to Canada 🙁
Nice upgrade!