with how smooth the Saturn 2’s plate is, you want those scuffs for much better adhesion, personally I would recommend getting 150-220 grit sandpaper and sanding the build plate, only if you’re experiencing adhesion issues tho, no point fixing a nonexistent problem
I get the same screen smudge crud like finger and palm prints on a phone or tablet screen! Its like that with the resin beong left sitting in vat separating after 3 or 4 days not removing it! I know on the anycubics if left for 3 or 4 days the chemical reaction splitting seems to soften up the fep causing more pull and damaging tue fep with dinted lines that then print on your model's! So I try and avoid this or if do leave it it's always stirred or ill through a test print through it just to keep things binded amd alive sorta thing! Yeah we have no proof this happens yet but I'm sure it does after replacing a week onle fep by leaving the resin in so long! Up to you obviously but on the side of caution just be aware this could possibly have a harmful effect on the cep fep can't remember the name in my saturn 2? But that screen clean the top of it it does after detail in prints! This I do know for sure is fact as I myself have tested this to see if that blurred muck on screen effects detail and it did! One of the corners of the the xp2 test prints were also smooth and fine once wiped clean! Maybe not notice it on these masks to much being all black amd soft detail
Never used a flex plate and i will never use one,you just need to have a sharp scraper,like a razor blade,the ones that come woth the printer i always make them more sharp with a dremel,you go under a corner and the whole print comes lose
Remember, beating your children or spouse is frowned upon in all civilized countries. A bit like fucking your children or stabbing your partner is in most nations, even the U.S.
){kind=link}
Is it mirror LCD or DLP?
with how smooth the Saturn 2’s plate is, you want those scuffs for much better adhesion, personally I would recommend getting 150-220 grit sandpaper and sanding the build plate, only if you’re experiencing adhesion issues tho, no point fixing a nonexistent problem
Did all that, plate moves like it's printing but it's creating nothing. Used Elegoo's Rook test file as well.
Is that the only thing you print?
How often to level your build plate?
I get the same screen smudge crud like finger and palm prints on a phone or tablet screen! Its like that with the resin beong left sitting in vat separating after 3 or 4 days not removing it! I know on the anycubics if left for 3 or 4 days the chemical reaction splitting seems to soften up the fep causing more pull and damaging tue fep with dinted lines that then print on your model's! So I try and avoid this or if do leave it it's always stirred or ill through a test print through it just to keep things binded amd alive sorta thing! Yeah we have no proof this happens yet but I'm sure it does after replacing a week onle fep by leaving the resin in so long! Up to you obviously but on the side of caution just be aware this could possibly have a harmful effect on the cep fep can't remember the name in my saturn 2? But that screen clean the top of it it does after detail in prints! This I do know for sure is fact as I myself have tested this to see if that blurred muck on screen effects detail and it did! One of the corners of the the xp2 test prints were also smooth and fine once wiped clean! Maybe not notice it on these masks to much being all black amd soft detail
Never used a flex plate and i will never use one,you just need to have a sharp scraper,like a razor blade,the ones that come woth the printer i always make them more sharp with a dremel,you go under a corner and the whole print comes lose
Did you have to install the little spacer that wham bam recommends?
My machine doesn't wanna home because it's lifted s bit and I can't set Z to 0 because it can't home
So no spacer is needed for the z limit switch?
Unscrew the nips lmfaoooo
My arms can’t relate but my thighs can
Brooo that looks way easier than leveling a regular 3D printer
Has anyone not made this print
i own the mars, havent used it in a while….
bro one time I needed 5 stitches from stabbing my self with one of those scrapers trying to get a print off.
The wham bam, thank you ma'am.
Remember, beating your children or spouse is frowned upon in all civilized countries. A bit like fucking your children or stabbing your partner is in most nations, even the U.S.
So that means I don’t have to tighten it up at all