In this kind of long video, I go through how to replace the worn out gear linkage bushings in my 2005 Saab 9-5 2.0t Vector.
This is a common issue on all manual 9-5’s from MY04 to MY09.
Took me about 1 hour and 20 minutes from start to finish. The most difficult part was removing the T40 Torx holding the linkage to the shaft on the gearbox.
Unfortunately the audio got messed up in the last half of the video. This is due to the non grounded wall outlet supplying the camera with power.
){kind=link}
Where i can order and buy, repair kit?
Take a look at the hose from the clutch! is scrubbed!
Plzz make a video for chaing the bushes under the gear stick! But what about the 9-5 from 1998 to 2001? :O