This is the correct way to do a perfect job on a siren to make it last.
For saab 9-5 98-10
For saab 9-3 98-02
Thanks to Visar Merseli for providing me with this alarm siren.
This is the correct way to do a perfect job on a siren to make it last.
For saab 9-5 98-10
For saab 9-3 98-02
Thanks to Visar Merseli for providing me with this alarm siren.
Comments are disabled for this post.
In my opinion not a perfect job when he don't seal the PCB afterwards with new conformal coating. It's important to avoid small leakage currents due to moisture and later functional problems. It's especially important when the protection will be burnt away at all soldering points as he does here. Many claim that theirs refurbished alarm units had stop to working only a couple of months after a repair, and this may be a cause.
Here is a better and more correct method for this job when conformal coating are used:
https://www.youtube.com/watch?v=ibEWHXE3fSI&t=556s
Otherwise it's a good job and video.
Har du nått kit hemma ? vad kostar det ? mvh Mattias
This is awesome. Can you repair mine like this?
Fantastic video! Not many have the patience to flow fresh solder into ALL the joints. Thank you so much for sharing