Subscribe to watch Mike finish this engine build and re-install it into his 1969 Pontiac GTO Restomod, in his home garage! “How to rebuild and install an oil pump”, is Part 10 of this Pontiac 400/455 rebuild. Mike also explains why he’s using an 80 lb. pump, with his custom ground Roller Cam, from Comp Cams, that is custom spec’d by Butler Performance.
NEW! FMG MERCHANDISE available! Here’s the online store for shirts (pick a color), and face masks, (Grey, Black, or Red) https://fmgmerch.threadless.com/
Here’s the Melling 80 lb. pump from Butler Performance; https://butlerperformance.com/i-24453374-melling-pontiac-ra-sd-high-vol-80-psi-oil-pump-w-o-pick-up-mel-m-54f.html?ref=category:1234738
Here’s Canton Racing pick up tube for the above Melling 80 lb. oil pump;
https://www.summitracing.com/parts/ctr-15-401
Here’s the Canton Road Racing oil pan I’m using…
https://www.summitracing.com/parts/ctr-15-400
Here’s the original Hydraulic Roller Lifter Inspection, and process:
https://youtu.be/y_iPx4CiMTg
Here’s the Official Part 1, where Mike starts the preparation of Engine removal
https://youtu.be/VWt2QxXOgOE
Enjoy, and ask questions by leaving a comment below… See you on the other side!
See the build pics, before and after, at www.fastmontysgarage.com
Instagram/fastmontysgarage
#PontiacV8 #EngineRebuild #HomeMechanic
We are still in the middle of our 400 rebuild and are considering buying the 80pis pump from butler vs the 60psi one. any thoughts on this? Also we have gotten a different set of heads through the grape vine. They are 46 heads off of a 428. they have the small valves and i believe they have 72cc chambers. Would these work better than the 7J2 heads that are on our engine? The 46's have the area to drill and tap end holes for the hooker headers that we bought so if we can use them that would be great as we got the heads for 12 bucks more than the L brackets that people use to provide end studs for the headers, honestly I would like to drill and tap the 46s. Willl the 72cc chambers kick our ratio up to far for pump gas? I think the 7J2 heads have an 96cc chambers not sure if they will work for us. Hope you are having a great day and thank you for making all these videos.
I lost my 421 ho due to a failure of the oil pump gasket