How to Replace Outer Tie Rod 2009-2010 Pontiac Vibe

How to Replace Outer Tie Rod 2009-2010 Pontiac Vibe

Buy Now!
New Tie Rod from 1AAuto.com http://1aau.to/ib/1ASTE00753

This video shows you how to install new TRQ outer tie rods on your 2009-2010 Pontiac Vibe. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.

This process should be similar on the following vehicles:
2009 Pontiac Vibe
2010 Pontiac Vibe

Tools you will need:
• 21mm wrench
• 22mm Wrench
• 17mm Socket http://1aau.to/osG/1AXAA00015
• 21mm Socket http://1aau.to/oim/1AXAA00043
• Side Cutters
• Torque Wrench http://1aau.to/omr/1AXAA00044
• Copper Anti-Seize
• Gloves http://1aau.to/occ/1AXSS00048
• Safety Glasses http://1aau.to/oby/1AXAA00343
• Floor Jack http://1aau.to/ofH/1AXAA00068
• Hammer http://1aau.to/ofi/1AXAA00091
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Pontiac Vibe 2009-2010 2nd Generation: https://www.youtube.com/playlist?list=PLJVpHWuCEUX9D0xZysJ9-K2Lu1urxCPbB

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

110
Like
Save


Comments

Comments are disabled for this post.