How to remove the 2004-2008 Pontiac Grand Prix headlight assembly for access to the bulbs. The same process is used for installing or converting to HIDs, however you’ll also need to mount the ballast and igniter to the vehicle.
Tools Needed:
10mm wrench or ratchet
9006/HB4 bulb for the low beam
9005/HB3 bulb for the high beam
Thank you Very helpful
Thanks a ton dude! Already got pulled over for an out light
Than k you for your help
Thanks very helpful
you fucking rock!!!! brum brum
well I see how to pop the headlight out now. Was just involved in a hit and run that broke the mounting bracket on the way to buy a replacement power cable for my dash cam since it has an apparent defect of falling apart in under a years time. I say defect because the guy on the customer service line told me a lot of complaints of similar problems happened with others.
That is slicker than snot on a door knob!
For the GTP follow these instructions:
Step 1: Lift the vehicle's hood.
Step 2: Lift and release the white tab on the back of the headlight assembly.
Step 3: You can now pull the headlight from the vehicle.
Step 4: Disconnect the wiring harness attached to the back of the headlight.
Thanks for this. Much appreciated.
This video was great compared to the others on YouTube that don't give awesome shots to see what you're doing. Thank you for this, you saved me a trip to the shop.
Very much appreciated! Thank you.
Thanks dude !