Car Fix DIY Videos

Buy Now!
New Fuel Pump Module Assembly from 1AAuto.com http://1aau.to/ia/1AFPU01442

This video shows you how to install a fuel pump on your 2009-2010 Pontiac Vibe. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need.

This process should be similar on the following vehicles:
2009 Pontiac Vibe
2010 Pontiac Vibe

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/ob/1AXAA00013
• Pocket Screwdriver
• 10mm Wrench http://1aau.to/oa/1AXAA00010
• Air Compressor
• 3/4 Inch Drive Ratchet
• Cloth Rags http://1aau.to/ob/1AXSS00035
• Bucket
• Drain Pan http://1aau.to/oa/1AXAA00320

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.