A DIY video tutorial on how to program a new key to a 2005 – 2010 Pontiac G6.
This procedure is for when all keys are lost for your G6. If you just need to add a key, you can find that video here https://youtu.be/L-GDMbNnFrc
More free key programming instructions available at https://www.ProgramAutoKeys.com
Remote programming instructions available at https://www.ProgramYourRemote.com
1. Insert a new cut chip key in ignition and turn key to the ON position for 10 minutes and 30 seconds.
2. Within 45 seconds turn the key to OFF and then back to the ON position for 10 minutes and 30 seconds.
3. Within 45 seconds turn the key to OFF and then back to the ON position for 10 minutes and 30 seconds.
4. Turn key OFF then back ON. The key is now programmed. Start vehicle to test key.
This procedure will program a new transponder ignition key to following years of Pontiac G6 2005, 2006, 2007, 2008, 2009 and 2010.
Thanks man!!! Real shit
After breaking key in ignition I drilled out and still had access to positions on cylinder kept key close to ignition and started with screwdriver….well I recently lost rest of that key…….can I use this process by keeping key close as if in ignition and use process and steps like in video?
I have a 06 Pontiac g6 GTP and I hear from everyone that there are no diy options for programming keys. Look forward to trying this out.
I have the keys but i need to program the new key fobs. Can i do that, if Yes. How should I do it?
I just tried this and the security light turned off, every time for each 10 minutes but when I try to turn the ignition on it makes a sound like if the battery is dead but all the windows go down, the doors lock and the lights are on. Is this cause I did something wrong? I got a 2009 g6 gt (I had the key made at a dealership with the VIN)
Tried this today and it worked on my 2009 Pontiac g6. You saved me 180. Thanks
How do i get the blade cut
Can confirm this works on a 2010 Pontiac g6. Spent $40 at a local GM dealership for the transponder key.( had to them make one based off the VIN.)
They told me to go to a local locksmith or have them tow it to the dealership. They wanted $200 for the tow and programming and the local locksmith wanted $175.
It starts now however it shuts off after 5 seconds of running
worked perfect the security/lock light didnt go away after the 10 minutes but it still worked after the 30 minutes of doing the steps …thank you
What if the light never goes off? It just stays on forever?
Can you get a hold of me im about to reprogram a key rn
My security light only blinks.
GMC was gonna have me tow my Pontiac in and have it reprogrammed, what a rip off. Thank you so much man.